KEY BENEFITS

• Dries clear for invisible repairs
• Fast-drying formula
• Strong flexible bond
• Ideal for quick repairs
• Will not warp paper
• Multi-surface bonding performance

WHERE TO USE

• Paper and cardboard
• Leather and felt
• Foam and rubber
• Wood and ceramics
• Metal surfaces
• Glassware and crockery
• Decorative projects
• School projects and crafts
• General household repairs
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry, and free from dust, grease, and contaminants
• Apply evenly to one or both surfaces depending on substrate requirements
• Join surfaces before adhesive dries
• Apply firm pressure for proper contact
• Allow full cure for approximately 24 hours

Critical: Ensure good ventilation during use and keep container closed after application

Tip: Double-sided application is recommended when longer open times are required

WHY CHOOSE

• Dries clear with no visible glue line
• Fast-setting for quick repairs
• Bonds multiple materials
• Flexible finish reduces cracking
• Ideal for craft, décor, and DIY applications

KEY SPECIFICATIONS

• Resin-based adhesive
• Clear formulation
• ast drying
• Flexible glue line
• Full cure: ±24 hours
• Acetone clean-up
• Interior use
• Ready-to-use formula

NOT SUITABLE FOR

• Painted surfaces
• Polished surfaces
• Wet surfaces
• Exterior exposure
• Continuous water immersion

TRIED. TESTED. TRUSTED. SINCE 1939.

HAN472

The post Genkem Clear Adhesive Glue appeared first on Genkem.

KEY BENEFITS

• High tack for instant grab
• Strong, durable adhesion
• Water & heat resistant (up to 65°C)
• Green tint blends with turf
• For concrete & timber
• Interior & exterior use

WHERE TO USE

• Artificial grass
• Concrete
• Timber
• Outdoors
• Landscaping
• Recreation areas
• And many more applications

HOW TO USE

• Apply adhesive evenly using a notched trowel to one surface
• Allow adhesive to set for approximately 10 minutes until tacky
• Lay artificial grass and press firmly into position
• Roll surface to ensure full contact and remove air pockets

Tip: Work in manageable sections to maintain tack during installation

WHY CHOOSE

• Built for outdoor performance
• Blends with natural grass finish
• Reliable long-lasting results
• Easy and consistent application
• Trusted Genkem quality

KEY SPECIFICATIONS

• Solvent-based (synthetic rubber)
• High initial tack
• Temperature resistant up to 65°C
• Coverage: approx. 3 m² per litre
• Open time: ± 10 minutes
• Full cure: ± 7 days
• Green in colour

TRIED. TESTED. TRUSTED. SINCE 1939.

GAGA

The post Genkem Artificial Grass Adhesive appeared first on Genkem.

Multi-Purpose Spray Contact Adhesive

KEY BENEFITS

• Spray-grade application
• Clear adhesive film
• Fast bonding performance
• Moisture resistant
• Temporary or permanent bonding
• Clean even application

WHERE TO USE

• Foam and cushioning materials
• Paper and posters
• Photographs
• Cardboard
• Felt and textiles
• Carpet tiles, wood and metal surfaces
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from grease or dust
• Shake can thoroughly before use
• Hold can approximately 20–25cm from the surface during spraying

Permanent Bonding:
• Apply a thin even coat to both surfaces
• Allow adhesive to dry for 10–20 minutes until touch dry
• Join surfaces and apply firm pressure

Temporary Bonding:
• Apply adhesive to one surface only
• Allow adhesive to dry for 10–20 minutes
• Press firmly into position

Porous Surfaces:
• Apply an additional coat where required
• Allow drying between coats

Critical: Not suitable for polystyrene foam, hood linings, wet surfaces or applications exposed to continuous temperatures above 50°C. Do not apply below 5°C.

Tip: After use, spray the can upside down until only gas escapes to prevent nozzle blockages.

WHY CHOOSE

• Cleaner than brush-on adhesives
• Fast drying improves productivity
• Clear bond line for cleaner finishes
• Supports temporary or permanent bonding
• Ideal for lightweight materials

KEY SPECIFICATIONS

• Solvent-based neoprene aerosol adhesive
• Clear formula
• Coverage: approximately 2.5m² per can
• Fast drying system
• Moisture resistant bond line
• Shelf life: 12 months
• Aerosol spray application

TRIED. TESTED. TRUSTED. SINCE 1939.

HAN510

The post Genkem Contact Spray Adhesive appeared first on Genkem.

KEY BENEFITS

• Instant grab – no clamping required
• Strong, permanent bond
• Multi-surface adhesion
• Heat and water resistant
• Flexible and durable
• Xylene-free formulation

WHERE TO USE

• Laminates and countertops
• Flooring and wall coverings
• Cabinetry and woodwork
• Upholstery and automotive trim
• Shoe and leather repair
• General DIY and repairs
• And many more applications

HOW TO USE

1. Apply adhesive evenly to both surfaces
2. Allow to flash off until touch-dry (15–20 minutes)
3. Align carefully and press firmly together

No repositioning once surfaces make contact

Tip: Use in a well-ventilated area

WHY CHOOSE

• Long open time for easier positioning
• Strong, reliable bond performance
• Flexible and durable finish
• Heat and water resistant
• Proven, trusted formulation

KEY SPECIFICATIONS

• Open Time: Up to 1 hour
• Flash-Off Time: 15–20 minutes
• Coverage: ±4 m² per litre (both surfaces combined)
• Application: Brush or roller
• Use Area: Interior and protected exterior use
• Clean Up: Before curing with suitable solvent
• Storage: Store sealed in a cool, dry place

TRIED. TESTED. TRUSTED. SINCE 1939.

HAN508

The post Genkem Contact Adhesive Glue appeared first on Genkem.