Water-Based Adhesive for Cornice Installation

KEY BENEFITS

• Ready-to-use formula
• Strong cornice adhesion
• Excellent flexibility
• Low shrinkage
• Slump resistant
• Easy water clean-up

WHERE TO USE

• Plaster cornices
• Polystyrene cornices
• Painted walls
• Unpainted walls
• Decorative wall finishes
• Interior renovation projects
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dust, grease or loose particles
• Stir adhesive well before use
• Apply evenly to one bonding surface using a putty knife
• Position the cornice correctly
• Press firmly into place
• Remove excess adhesive immediately
• Allow approximately 24 hours before painting or further finishing work

Critical: Not suitable for structural bonding, wet surfaces or continuous water exposure. Do not apply below 5°C or apply excessively thick layers.

Tip: Dry-fit cornice sections before applying adhesive to ensure accurate alignment at corners and joins.

WHY CHOOSE

• Designed specifically for cornice installation
• Suitable for plaster and polystyrene cornices
• Easy DIY application
• Flexible bond helps accommodate minor movement
• Clean professional finish

KEY SPECIFICATIONS

• Water-based acrylic adhesive
• Ready-to-use formula
• Colour: White
• High viscosity
• Coverage: approximately 1.5m² per litre
• Drying time: approximately 24 hours
• Shelf life: 12 months

TRIED. TESTED. TRUSTED. SINCE 1939.

GCA

The post Genkem Cornice Adhesive appeared first on Genkem.

Foam-Safe High-Tack Bonding Adhesive

KEY BENEFITS

• Designed for polystyrene foam bonding
• High initial tack
• Strong long-term bond
• Heat resistant
• Bonds foam to multiple surfaces
• Ready-to-use formula

WHERE TO USE

• Polystyrene sheets
• Ceiling tiles
• Insulation boards
• Decorative foam applications
• Wood surfaces
• Metal and fibreglass surfaces
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from grease or dust
• Stir well before use
• Apply a thin coat to both surfaces
• Allow adhesive to dry for approximately 15 minutes
• Carefully position surfaces together
• Apply mild pressure to secure the bond

Critical: Do not overapply adhesive. When bonding polystyrene to itself, ensure the adhesive is fully dry before joining surfaces. Excess adhesive or bonding while wet may damage the foam. Do not use below 5°C.

Tip: Test on a small area first when working with lightweight decorative or low-density foam products.

WHY CHOOSE

• Designed specifically for foam applications
• Helps prevent foam damage
• Stronger than standard craft adhesives
• Suitable for insulation and decorative projects
• Easy brush or spray application

KEY SPECIFICATIONS

• Rubber-based adhesive
• SBR formulation
• High initial tack
• Approximate dry time: 15 minutes
• Full bond strength: 24 hours
• Shelf life: 12 months
• Brush or spray application

TRIED. TESTED. TRUSTED. SINCE 1939.

HIS501

The post Genkem Polystyrene Foam Adhesive appeared first on Genkem.

High-Quality Adhesive for Wallpaper Applications

KEY BENEFITS

• Suitable for most wallpaper types
• Strong reliable adhesion
• Easy positioning during application
• Smooth lump-free mixing
• Easy clean-up
• Professional finish results

WHERE TO USE

• Standard wallpaper
• Decorative wallpaper
• Feature walls
• Painted interior walls
• Plastered walls
• Poster applications
• And many more applications

HOW TO USE

• Ensure walls are clean, dry and free from dust, grease or loose paint
• Lightly sand glossy painted surfaces where required
• Allow new plaster to cure for at least 6 weeks before application
• Mix adhesive powder with clean cold water until smooth and lump-free
• Allow mixture to stand for 5 minutes, then stir again

Mixing Guide (per 250g pack):
• Light wallpaper: 5 litres water
• Standard wallpaper: 4 litres water
• Heavy wallpaper: 3 litres water

• Apply evenly to the back of the wallpaper using a brush
• Hang wallpaper while adhesive is still wet
• Smooth out air bubbles using a wallpaper brush or roller
• Wipe excess adhesive off immediately with a damp cloth

Critical: Do not apply over loose paint, damp walls or uncured plaster.

Tip: Always match wallpaper patterns before applying adhesive to avoid unnecessary waste.

WHY CHOOSE

• Easy DIY application
• Strong wallpaper adhesion
• Smooth positioning during installation
• Suitable for multiple wallpaper types
• Easy clean-up with warm soapy water

KEY SPECIFICATIONS

• Modified starch-based adhesive
• White powder formula
• Neutral pH
• Coverage: approximately 6–8 rolls per 250g
• Drying time: 12–24 hours
• Non-flammable
• Shelf life: 24 months

TRIED. TESTED. TRUSTED. SINCE 1939.

HWP274

The post Genkem Wallpaper Adhesive appeared first on Genkem.

High-Strength Instant Grab Mounting Adhesive

KEY BENEFITS

• Replaces nails, screws and drilling
• Strong instant grab
• Solvent-free formula
• Paintable when dry
• Interior and exterior use
• Multi-surface bonding

WHERE TO USE

• Skirting boards
• Wall panels and cladding
• Door frames
• Window sills
• Ceramic tiles
• Decorative trims and mouldings
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dust or grease
• Cut nozzle and load cartridge into an applicator gun
• Apply adhesive in beads or spots every 20–40cm depending on material weight
• Press surfaces firmly into position
• For heavier materials, support where required during curing
• Allow adhesive to cure fully before applying heavy loads

Critical: Not suitable for polystyrene, certain plastics or continuous water immersion. Always ensure proper surface preparation before application.

Tip: For heavier items, temporarily support the bonded material until full strength develops.

WHY CHOOSE

• Faster than mechanical fixing
• No visible screws or nails
• Clean professional finish
• Ideal for renovation and installation projects
• Strong long-term bond performance

KEY SPECIFICATIONS

• Water-based mounting adhesive
• Solvent-free formula
• Open time: 5–10 minutes
• Initial cure: 2–5 hours
• Full cure: approximately 7 days
• Paintable once dry
• Shelf life: 12 months

TRIED. TESTED. TRUSTED. SINCE 1939.

GNMN

The post Genkem Montage No Nails Adhesive appeared first on Genkem.