Protective Automotive & Metal Coating

KEY BENEFITS

• Impact resistant
• Abrasion resistant
• Corrosion resistant
• Chemical resistant
• Brush or spray application
• Smooth or textured finish options

WHERE TO USE

• Vehicle underbodies
• Rocker panels
• Sills
• Mudguards
• Bumpers
• Trailers and industrial metal surfaces
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dust, grease and loose rust
• Prime bare metal using a suitable self-etch primer
• Remove rust mechanically before coating rusted surfaces
• Abrade previously painted surfaces to a matte finish
• Stir thoroughly before use

Brush/Roller Application:
• Apply evenly for full coverage

Spray Application – Textured Finish:
• Use a 4mm bore gravity spray gun
• Apply at 3–4 bar pressure
• Hold approximately 500mm from the surface

Spray Application – Smooth Finish:
• Dilute with 15–20% water
• Use a 1.5mm bore spray gun
• Apply at 4–5 bar pressure
• Hold approximately 450–500mm from the surface

• Allow approximately 2 hours between coats
• Allow approximately 24 hours for full cure

Critical: Not suitable for continuous water immersion, wet surfaces, contaminated substrates or unprepared rusted surfaces.

Tip: Use textured application for underbody protection and smooth finishes where appearance is important.

WHY CHOOSE

• Designed for automotive protection
• Helps prevent corrosion damage
• Resistant to fuel and oil exposure
• Flexible application options
• Suitable for vehicle and industrial maintenance

KEY SPECIFICATIONS

• Water-based acrylic coating
• Available in standard colours
• Coverage: approximately 4m² per litre
• Touch dry (smooth): 3–4 hours
• Touch dry (textured): ±8 hours
• Full cure: ±24 hours
• Non-flammable

TRIED. TESTED. TRUSTED. SINCE 1939.

GIC

Available Colours:
Yellow, Red, Black, White, Grey

The post Genkem Impact Protective Coating appeared first on Genkem.

Heavy-Duty Polyurethane Protective Coating

KEY BENEFITS

• Tough polyurethane coating
• Textured non-skid finish
• Prevents chipping, rust and peeling
• Impact and chemical resistant
• Brush or roller application
• Durable long-term protection

WHERE TO USE

• Bakkie load beds
• Trailers
• 4×4 vehicles
• Trucks
• Utility boxes
• Ramps and heavy-duty metal surfaces
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dust, oil, grease and loose rust
• Lightly sand smooth or glossy surfaces to improve adhesion
• Prime bare metal where required for best adhesion
• Stir product thoroughly before use
• Apply using a brush or roller
• Apply two coats for best results
• Allow proper drying time between coats

Critical: Do not apply in wet conditions or if rain is expected before curing. Not suitable for continuous water immersion.

Tip: For heavily rusted surfaces, remove rust thoroughly before application to maximise long-term performance.

WHY CHOOSE

• Designed for demanding working environments
• Helps extend the life of metal surfaces
• Easier and more cost-effective than replacing damaged surfaces
• Simple brush-grade application
• Ideal for DIY, trade and fleet maintenance use

KEY SPECIFICATIONS

• One-part polyurethane coating
• Colour: Black
• Touch dry: 2–4 hours
• Light use: 24 hours
• Full cure: 4–7 days
• Brush or roller application
• Interior and exterior use on suitable surfaces

TRIED. TESTED. TRUSTED. SINCE 1939.

GBLBG

The post Genkem Bedliner Black Protective Coating appeared first on Genkem.

• Heat Resistant
• Permanent Seal
• Easy To Use
• Fast Curing
• Contains No Asbestos

Suitable For Use On:
Sealing exhaust piping and systems
High temperature adhesive
Flame proof adhesive
Adhesive for insulation materials
Sealing of ovens / braai stands / fireplaces

Available Pack Size:
250g

The post Genkem Exhaust Putty appeared first on Genkem.