Professional Equipment Cleaner & Surface Degreaser

KEY BENEFITS

• Effective paint and varnish cleaner
• Powerful degreasing action
• Water-soluble clean-up system
• Suitable for brushes and rollers
• Assists in removing oils and grease
• Ready-to-use formulation

WHERE TO USE

• Brush cleaning
• Roller cleaning
• Spray equipment cleaning
• Paint equipment maintenance
• Degreasing masonry surfaces
• Removal of oils and grease contamination
• And many more applications

HOW TO USE

• Product is supplied ready to use and must not be diluted
• Shake thoroughly before use
• Ensure adequate ventilation during use

Equipment Cleaning:

• Decant product into a suitable metal, glass or polyethylene container
• Work brushes, rollers or equipment thoroughly in the cleaning solution
• Rinse thoroughly using clean running water
• Allow equipment to dry completely before reuse

Degreasing Brick & Cement Surfaces:

• Apply undiluted product directly to the contaminated area
• Scrub thoroughly using a brush
• Treat small sections at a time
• Wash the surface thoroughly after cleaning
• Allow surfaces to dry before recoating or further treatment

Critical: Nova 11 is designed for cleaning uncured paints, varnishes and sealers and is not intended as a paint stripper for fully cured coatings. Not suitable for sensitive plastics or delicate surfaces without prior testing.

Tip: Regular cleaning of brushes, rollers and spray equipment after use helps prevent hardened coating build-up, extends equipment life and maintains application performance.

WHY CHOOSE

• Cleans a wide range of coating application equipment
• Removes oils, grease and uncured coating residues
• Water-soluble for easier clean-up after use
• Suitable for workshop and maintenance applications
• Compatible with multiple Nova and Bourne coating systems

KEY SPECIFICATIONS

• Solvent cleaner and degreaser
• Water-soluble formulation
• Ready-to-use liquid
• Wipe, soak or brush application
• Specific gravity: 0.8–0.9
• Shelf life: 24 months unopened
• Suitable for equipment cleaning and surface degreasing

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N11BRC

The post Nova 11 Brush Cleaner & Degreaser appeared first on Genkem.

Quick-Drying Timber Preparation Sealer

KEY BENEFITS

• Rapid quick-drying formulation
• Wood sealer and grain-filling properties
• Improves adhesion for topcoats
• Stain-blocking properties
• Creates a silky-smooth finish base
• Easy sanding properties

WHERE TO USE

• Wooden furniture and cabinetry
• Wooden floors
• Wooden doors
• Wooden panelling
• Wooden staircases
• Skirting boards
• Raw timber preparation
• And many more applications

HOW TO USE

• Ensure timber is clean, dry and free from dust, grease and contamination
• Sand new timber smooth using 80–100 grit sandpaper and remove all dust
• Remove old coatings completely using Nova 08 Novastrip where required
• Ensure all previous sealers and finishes have been removed
• Stir thoroughly before use
• Apply a thin, even coat using a clean brush
• Apply only enough material to fill the timber grain and minor surface imperfections
• Allow approximately 2 hours drying before sanding
• Sand smooth using 160–240 grit sandpaper

For Highly Porous Timber:
• Apply additional light coats where required
• Allow drying between coats before sanding

Topcoating:
• Overcoat with Nova solvent-based or water-based timber finishes once sanding is complete

Critical: Nova 07 is a preparation product and not a final finish. It must always be overcoated with a suitable timber sealer, oil or varnish. Not suitable for previously painted, varnished or sealed surfaces unless fully stripped back to bare timber. Do not apply to damp timber.

Tip: Nova 07 is particularly effective on softwoods such as Pine where raised grain can affect the quality of the final finish. For stained timber, apply Nova 07 directly over Nova 18 Novadye before applying the final topcoat.

WHY CHOOSE

• Fills open grain and minor timber imperfections
• Creates a smoother final finish
• Reduces raised grain on softwoods
• Compatible with water-based and solvent-based Nova finishes
• Improves topcoat adhesion and appearance
• Fast drying for quicker project completion

KEY SPECIFICATIONS

• Resin modified nitrocellulose sanding sealer
• Smooth silky finish base
• Coverage: 6–8m²/L
• Surface dry: 0–30 minutes
• Recoat time: ±2 hours
• Suitable over Nova 18 Novadye stains
• Clean-up with Nova 11 Brush Cleaner & Degreaser

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N07SSL

The post Nova 7 Sanding Sealer appeared first on Genkem.

KEY BENEFITS

• Fast-acting stain removal
• New gel formula for better cling
• Removes mould, mildew and algae stains
• Reduces run-off on vertical surfaces
• Easy spray-on application
• Suitable for indoor and outdoor use

WHERE TO USE

• Tiles and grout lines
• Showers and shower walls
• Baths and basins
• Jacuzzis and wet areas
• Damp interior walls
• Exterior damp surfaces
• And many more applications

HOW TO USE

• Scrape off loose paint, heavy algae or loose contamination
• Remove dirt or grease using Genkem Super Power Clean where required
• Test on a small hidden area before full application
• Spray evenly from approximately 15 cm until fully saturated
• Leave for 10–20 minutes (up to 30 minutes for heavy stains)
• Scrub if required and rinse thoroughly with clean water

Critical: Do not allow product to dry on the surface during application

Tip: For severe mould build-up, a second application may be required

WHY CHOOSE

• Penetrates deep into biological stains
• Improved cling on vertical surfaces
• Faster and easier than traditional mould cleaning methods
• Suitable for both interior and exterior cleaning
• Designed for high-moisture problem areas

KEY SPECIFICATIONS

• Gel-based cleaning formulation
• Trigger spray application
• Fast-acting stain remover
• Indoor and outdoor use
• Suitable for hard surfaces
• Targets mould, mildew and algae stains
• Available in spray pack format

TRIED. TESTED. TRUSTED. SINCE 1939.

TDRMST

The post Genkem Mould Stop Gel Cleaner appeared first on Genkem.

Heavy-Duty Cleaner & Degreaser

KEY BENEFITS

• Cuts through grease and oil
• Removes stubborn grime
• Highly concentrated formula
• Can be diluted up to 100:1
• Neutralises surfaces after stripping
• Suitable for multiple surfaces

WHERE TO USE

• Garage floors
• Workshop floors
• Ovens and extractor fans
• Braai areas
• Machinery and tools
• Driveways and patios
• And many more applications

HOW TO USE

• Remove heavy grease build-up by scraping where necessary
• Dilute product with water based on cleaning requirements

Dilution Guide:
• General cleaning: 1 part product to 10 parts water
• Lighter cleaning applications may require higher dilution ratios
• Product can be diluted up to 100 parts water depending on surface and contamination level

• Apply using a spray bottle, mop, cloth or brush
• Allow product to work for up to 10 minutes
• Scrub where required
• Rinse thoroughly with clean water
• Rinse again if required to ensure no residue remains

Critical: Do not allow product to dry on the surface. Do not mix with other chemicals. Always test on a small area first.

Tip: For surfaces previously cleaned with acid or stripping products, use Super Power Clean as a final neutralising wash.

WHY CHOOSE

• Stronger than everyday household cleaners
• Extremely economical concentrated formula
• Effective on grease-heavy surfaces
• Suitable for home and industrial use
• Multi-surface cleaning performance

KEY SPECIFICATIONS

• Water-based formula
• Highly concentrated cleaner
• Non-ammoniated
• Non-flammable
• Clear liquid formulation
• Specific gravity: 1.026
• Indefinite shelf life when stored correctly

TRIED. TESTED. TRUSTED. SINCE 1939.

The post Genkem Super Power Clean Degreaser appeared first on Genkem.

KEY BENEFITS

• Dries clear for invisible repairs
• Fast-drying formula
• Strong flexible bond
• Ideal for quick repairs
• Will not warp paper
• Multi-surface bonding performance

WHERE TO USE

• Paper and cardboard
• Leather and felt
• Foam and rubber
• Wood and ceramics
• Metal surfaces
• Glassware and crockery
• Decorative projects
• School projects and crafts
• General household repairs
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry, and free from dust, grease, and contaminants
• Apply evenly to one or both surfaces depending on substrate requirements
• Join surfaces before adhesive dries
• Apply firm pressure for proper contact
• Allow full cure for approximately 24 hours

Critical: Ensure good ventilation during use and keep container closed after application

Tip: Double-sided application is recommended when longer open times are required

WHY CHOOSE

• Dries clear with no visible glue line
• Fast-setting for quick repairs
• Bonds multiple materials
• Flexible finish reduces cracking
• Ideal for craft, décor, and DIY applications

KEY SPECIFICATIONS

• Resin-based adhesive
• Clear formulation
• ast drying
• Flexible glue line
• Full cure: ±24 hours
• Acetone clean-up
• Interior use
• Ready-to-use formula

NOT SUITABLE FOR

• Painted surfaces
• Polished surfaces
• Wet surfaces
• Exterior exposure
• Continuous water immersion

TRIED. TESTED. TRUSTED. SINCE 1939.

HAN472

The post Genkem Clear Adhesive Glue appeared first on Genkem.

KEY BENEFITS

• High-gloss finish
• Hard-wearing protection
• Non-yellowing
• No polishing required
• Non-slip finish
• Easy maintenance

WHERE TO USE

• Hardwood floors
• Softwood floors
• Parquet flooring
• Strip flooring
• Mosaic flooring
• Interior timber flooring
• And many more applications

HOW TO USE

• Sand floors thoroughly to clean bare timber
• Ensure timber moisture content is between 8% and 12%
• Remove all dust and contamination before coating
• Use Bourne Sanding Sealer where required
• Product is supplied ready to use — do not dilute
• Apply using a lambswool applicator, block applicator or mohair roller

Standard System:
• Apply first coat
• Allow to dry and sand lightly
• Apply second coat
• Allow to dry and sand lightly
• Apply third coat

Heavy Traffic Areas:
• Apply 4–5 coats where required

• Allow approximately 6–8 hours between coats
• Allow foot traffic after approximately 12 hours
• Allow approximately 7 days for full cure

Critical: For interior wooden floors only. Not suitable for exterior woodwork, damp timber or poorly prepared surfaces. Do not over-apply as surface crazing may occur.

Tip: Maintain good ventilation during drying to improve curing consistency and final gloss performance.

WHY CHOOSE

• Premium high-gloss floor finish
• Tough protection for timber floors
• No ongoing polishing required
• Maintains natural wood appearance
• Suitable for residential and commercial use

KEY SPECIFICATIONS

• Alkyd-based wooden floor sealer
• Dries clear
• Gloss level: 80–100%
• Coverage: Hardwood ±10m²/L
• Coverage: Softwood ±5m²/L
• Recoat time: 6–8 hours
• Shelf life: 24 months

FOR THAT JUST POLISHED LOOK.

NBUGLE

The post Bourne Gleem High Gloss Wooden Floor Sealer appeared first on Genkem.

High-Gloss Interior & Exterior Timber Varnish

KEY BENEFITS

• Ultra-long-life alkyd varnish
• UV resistant
• Water resistant
• Mildew resistant
• Hard-wearing gloss finish
• Interior and exterior use

WHERE TO USE

• Garden furniture
• Window frames
• Shutters and balustrades
• Doors and pergolas
• Fascias and timber gates
• Interior and exterior timber surfaces
• And many more applications

HOW TO USE

• Ensure timber is clean, dry and free from dust, grease and contamination
• Sand new timber using 120–180 grit sandpaper and remove all dust
• Remove old coatings using Nova 08 Novastrip where required
• Stir thoroughly before and during use
• Thin the first coat with up to 20% Mineral Turpentine to improve penetration into timber
• Apply evenly following the timber grain direction
• Apply subsequent coats undiluted using a quality brush or spray equipment
• Allow a minimum of 8 hours between coats
• Lightly sand between coats using 180–220 grit sandpaper
• Remove all sanding dust before recoating
• Allow 16–24 hours drying between coats for optimum gloss development
• Apply a minimum of 2–3 coats depending on timber exposure and porosity
• For spray application, thin with up to 20% Mineral Turpentine where required
• Avoid excessive film build

Critical: Do not apply to damp timber, during rain or high humidity, or to timber intended for permanent water immersion. Not suitable for high-traffic decking applications. Nova 16 must not be applied over Nova 15 Timberseal Penetrating Oil.

Tip: For maximum durability on exterior timber, apply three full coats and pay particular attention to end grain and exposed timber edges.

WHY CHOOSE

• Long-lasting timber protection
• Excellent weather resistance
• Helps protect against moisture and mildew
• Enhances natural timber beauty
• Recommended by the Merensky Foundation

KEY SPECIFICATIONS

• Alkyd timber varnish
• High-gloss finish
• Interior and exterior use
• UV and weather resistant
• Mildew resistant
• Mineral Turpentine clean-up
• Available in multiple pack sizes

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N16NAT | N16IMB | N16KIA | N16SAP | N16MAH | N16MER | N16DOA

The post Nova 16 Novaglow Varnish appeared first on Genkem.

Penetrating Timber Protection Oil

KEY BENEFITS

• Penetrating oil system
• UV resistant
• Water resistant
• Nourishes timber
• Matt natural finish
• Will not readily crack or peel

WHERE TO USE

• Pergolas
• Timber gates
• Garage doors
• Timber fascias and fences
• Exterior timber cladding
• Window frames and timber furniture
• And many more applications

HOW TO USE

• Ensure timber is clean, dry and free from wax, grease and contamination
• Remove old coatings using Nova 08 Novastrip where required
• Sand timber smooth and remove all dust before coating
• Stir thoroughly before use
• Product is supplied ready to use and should not normally be diluted
• Apply a generous coat using a clean brush
• Work thoroughly into the timber, end grain and exposed edges
• Allow approximately 24 hours drying between coats
• Apply a second coat where required

Hardwood Application:
• Dense hardwoods such as Balau, Teak, Saligna, Meranti, IPE and Massaranduba may require additional coats
• For difficult hardwoods, an initial 50/50 blend of Nova 15 and Mineral Turpentine may be used to improve penetration

Critical: Do not apply to damp timber, during rain, in high humidity conditions or to timber intended for permanent water immersion. Not suitable for high-traffic decking applications.

Tip: Pre-treat timber with Nova 30 Timber Treatment & Preserver before sealing for improved long-term timber protection and termite resistance.

WHY CHOOSE

• Deep penetrating timber nourishment and protection
• Excellent exterior weather resistance
• Helps reduce moisture penetration and timber drying
• Ideal for difficult timber profiles and hardwoods
• Natural matt finish enhances timber grain and character

KEY SPECIFICATIONS

• Oil-enriched wax-based penetrating sealer
• Natural matt finish
• Coverage: 8–10m²/L per coat
• Recoat time: 24 hours
• Full cure: ±7 days
• Available in Natural, Teak and Mahogany variants
• Shelf life: 12–24 months

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N15MAH | N15NAT | N15TEA

The post Nova 15 Timberseal Penetrating Oil appeared first on Genkem.

Marine & Exterior Timber Sealer

KEY BENEFITS

• Penetrating timber protection
• UV resistant
• Water repellent
• Anti-fungal protection
• Enhances natural timber appearance
• Will not readily crack or peel

WHERE TO USE

• Exterior doors
• Window frames
• Timber furniture
• Gates and fascias
• Timber cladding
• Garden furniture
• And many more applications

HOW TO USE

• Ensure timber is clean, dry and free from wax, grease and contamination
• Sand new timber using 140–180 grit sandpaper and remove all dust
• Stir thoroughly before and during use
• Apply using a quality bristle brush following the timber grain direction
• Work product thoroughly into end grain, joints and exposed timber edges

For Porous or Weathered Timber:
• Thin the first coat with up to 10–15% Genkem Mineral Turpentine to improve penetration
• Allow 4–8 hours drying depending on conditions

Subsequent Coats:
• Apply a minimum of 2–3 coats
• Allow at least 8–16 hours between coats
• For best results allow overnight drying between coats
• Lightly sand between coats using 220 grit sandpaper

Critical: Not suitable for continuous water immersion, high-traffic decking, below-waterline marine applications or damp timber. Do not apply during rain or in excessively humid conditions.

Tip: Pre-treat exterior timber with Nova 30 Timber Treatment & Preserver before sealing for enhanced long-term timber protection.

WHY CHOOSE

• Designed specifically for exterior timber protection
• Excellent resistance to weathering and UV exposure
• Flexible finish resists cracking and peeling
• Enhances natural timber grain and colour
• Suitable for both interior and exterior timber surfaces

KEY SPECIFICATIONS

• Resin-based timber sealer
• Available in Low Sheen and High Sheen finishes
• Coverage: 8–10m²/L per coat
• Touch dry: 2–4 hours
• Recoat time: 16 hours
• Full cure: 24–48 hours
• Shelf life: 12–24 months

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N14GLO | N14MAT

The post Nova 14 Novaseal Marine Sealer appeared first on Genkem.

 D4 Waterproof Polyurethane Wood Adhesive

KEY BENEFITS

• D4 waterproof performance
• Exceptional moisture resistance
• Gap-filling expansion
• Structural bond strength
• Interior and exterior use
• Solvent free

WHERE TO USE

• Furniture manufacturing
• Window frames
• Door manufacturing
• Kitchen cabinetry
• Bathroom cabinetry
• Garden furniture
• And many more applications

HOW TO USE

• Ensure timber surfaces are clean, dry and free from dust or grease
• Lightly abrade smooth timber surfaces where required
• Lightly dampen one bonding surface before application
• For dense hardwoods, lightly dampen both bonding surfaces
• Apply adhesive evenly to one surface only
• Assemble components within 1–5 minutes
• Clamp firmly for 1–2 hours
• Allow approximately 24 hours for full cure

Critical: Do not overapply as the adhesive expands during curing. Not suitable for polyethylene, polypropylene, unstable timber or continuous water immersion.

Tip: Wear gloves during application and remove excess expanding adhesive before it fully cures for easier clean-up.

WHY CHOOSE

• Designed for professional woodworking applications
• Higher water resistance than standard wood glues
• Expands to fill minor timber gaps
• Proven structural bond performance
• Ideal for demanding timber environments

KEY SPECIFICATIONS

• One-component polyurethane adhesive
• EN204/205 D4 classification
• ANSI/HPVA Type II water resistance
• Open time: 1–5 minutes
• Clamp time: 1–2 hours
• Full cure: 24 hours
• Coverage: 3–4m² per litre

TRIED. TESTED. TRUSTED. SINCE 1939.

The post Genkem D4 PU Wood Glue appeared first on Genkem.