Genkem Impact Protective Coating | Anti-Rust Underbody, Stone Chip, Trailer & Metal Protection Paint
Protective Automotive & Metal Coating
KEY BENEFITS
- Impact resistant
- Abrasion resistant
- Corrosion resistant
- Chemical resistant
- Brush or spray application
- Smooth or textured finish options
WHERE TO USE
- Vehicle underbodies
- Rocker panels
- Sills
- Mudguards
- Bumpers
- Trailers and industrial metal surfaces
- And many more applications
HOW TO USE
- Ensure surfaces are clean, dry and free from dust, grease and loose rust
- Prime bare metal using a suitable self-etch primer
- Remove rust mechanically before coating rusted surfaces
- Abrade previously painted surfaces to a matte finish
- Stir thoroughly before use
Brush/Roller Application:
• Apply evenly for full coverage
Spray Application – Textured Finish:
• Use a 4mm bore gravity spray gun
• Apply at 3–4 bar pressure
• Hold approximately 500mm from the surface
Spray Application – Smooth Finish:
• Dilute with 15–20% water
• Use a 1.5mm bore spray gun
• Apply at 4–5 bar pressure
• Hold approximately 450–500mm from the surface
- Allow approximately 2 hours between coats
- Allow approximately 24 hours for full cure
Critical: Not suitable for continuous water immersion, wet surfaces, contaminated substrates or unprepared rusted surfaces.
Tip: Use textured application for underbody protection and smooth finishes where appearance is important.
WHY CHOOSE
- Designed for automotive protection
- Helps prevent corrosion damage
- Resistant to fuel and oil exposure
- Flexible application options
- Suitable for vehicle and industrial maintenance
KEY SPECIFICATIONS
- Water-based acrylic coating
- Available in standard colours
- Coverage: approximately 4m² per litre
- Touch dry (smooth): 3–4 hours
- Touch dry (textured): ±8 hours
- Full cure: ±24 hours
- Non-flammable
TRIED. TESTED. TRUSTED. SINCE 1939.
GIC
Available Colours:
Yellow, Red, Black, White, Grey
