GENKEM PREMIUM PLUS WEATHER PROTECTOR
KEY BENEFITS
- Coarse textured decorative finish
- Helps bridge hairline cracks
- Flexible coating
- Excellent adhesion to properly prepared surfaces
- Excellent UV resistance
- Excellent weather protection
- Washable finish
- High-build formulation helps conceal minor surface imperfections
- Water-based and low odour
WHERE TO USE
- Exterior plastered walls
- Rough or undulating plaster
- Concrete
- Cement render
- Brickwork
- Masonry surfaces
- Residential buildings
- Commercial buildings
- Exterior renovation projects
- Surfaces requiring a coarse textured finish
- And many more applications
HOW TO USE
- Ensure all surfaces are clean, dry and properly prepared before coating
- Stir thoroughly before use
- Product is supplied ready for use – do not dilute
- Prime new inland plaster with Premium Plus Plaster Primer and coastal surfaces with Premium Plus Alkaline Resistant Primer where required
- Apply using a quality brush or roller
- A lambswool roller is recommended to achieve the optimum coarse textured finish
- Apply two coats for new work and one maintenance coat where appropriate
- Allow approximately 6-8 hours between coats
Critical:Exterior use only. Do not apply below 10 C or during cold, wet or damp conditions. Do not dilute, as this will reduce the texture and performance of the coating. Spray application is not recommended. New plaster must have a moisture content below 5%, and fresh concrete must cure for at least 6 weeks before coating.
Tip:Maintain a wet edge and complete one wall or natural break at a time. Use product from the same batch on large continuous areas to help minimise colour variation.
WHY CHOOSE
- Long-lasting protection for exterior masonry surfaces
- Helps conceal minor surface imperfections with a coarse textured finish
- Flexible coating helps bridge hairline cracks
- Excellent resistance to UV exposure and weathering
- Durable, washable finish for residential and commercial buildings
KEY SPECIFICATIONS
- Acrylic textured exterior coating
- Coarse textured matt finish
- Coverage: 4-6m /L per coat (depending on substrate porosity)
- Surface dry: 0-2 hours
- Hard dry: 2-4 hours
- Recoat time: 6-8 hours
- Full cure: Approximately 48 hours
- Brush or roller application
- Ready for use
Backed by Genkem. Tried. Tested. Trusted. Since 1939.
QAP732EC | QAP732SDN | QAP732VIL









