Genkem High Performance LVT Flooring Adhesive | Wet Stick Glue for Vinyl Planks & Luxury Vinyl Tiles
High-Performance Wet-Stick Vinyl Flooring Adhesive
KEY BENEFITS
- High initial grab
- Strong long-term bond
- Wet-stick installation system
- Moisture resistant once cured
- Low VOC formula
- Fast and efficient installation
WHERE TO USE
- Luxury vinyl tiles (LVT)
- Vinyl plank flooring
- Interior concrete screeds
- Residential flooring installations
- Commercial flooring installations
- High-performance flooring projects
- And many more applications
HOW TO USE
- Ensure surfaces are clean, dry, level and properly prepared
- Confirm substrate moisture is below 3%
- Stir adhesive thoroughly before use
- Apply evenly using a 1.5mm x 1.5mm x 1.5mm V-notch trowel with 5mm spacing
- Install flooring immediately into wet adhesive
- Work in manageable sections only
- Roll flooring using a 68kg three-section floor roller
Rolling Guide:
• Coastal regions: Roll within 10 minutes
• Inland regions: Roll within 60 minutes
Critical: No flash-off time is required. Do not use on wooden substrates, foam-backed flooring systems or damp surfaces.
Tip: Remove excess adhesive immediately during installation to maintain clean joints and a professional finish.
WHY CHOOSE
- Designed specifically for LVT and vinyl planks
- Faster installation than traditional flooring adhesives
- Reduces tile movement and peaking
- Moisture-resistant performance
- Professional-grade installation reliability
KEY SPECIFICATIONS
- Water-based acrylic adhesive
- Wet-stick application system
- Coverage: 4–5m² per litre
- Working time: 15–60 minutes
- Immediate initial bond
- Full cure: 24–48 hours
- Shelf life: 12 months
TRIED. TESTED. TRUSTED. SINCE 1939.
G179
