Genkem Timber Flooring Adhesive | Parquet & Mosaic Wood Floor Glue for Timber Panels
Specialist Adhesive for Mosaic Wood Flooring & Timber Panels
KEY BENEFITS
- Designed for mosaic wood flooring
- Ideal for timber floor panels
- Strong permanent bond
- Hard-drying formula
- Water-based and easy to use
- No cracking over time
WHERE TO USE
- Mosaic wood flooring
- Parquet flooring panels
- Small-format timber floor panels
- Interior concrete floors
- Interior plaster surfaces
- Non-structural timber bonding
- And many more applications
HOW TO USE
- Ensure surfaces are clean, dry and free from dust or loose particles
- Stir adhesive thoroughly before use
- Do not add water or solvents
- Apply using a serrated steel trowel
Trowel Guide:
• Use a 6mm spaced serrated trowel with 3mm deep notches
- Spread adhesive in sections of approximately 500mm wide x 3m long
- Allow approximately 10 minutes flash-off time before placing timber panels
- Position panels and tap firmly using a rubber mallet
- Allow at least 48 hours before sanding or walking on the floor
Critical: Not suitable for engineered click flooring, floating laminate systems, large solid timber planks, exterior applications, damp surfaces or structural timber bonding. Do not apply below 5°C.
Tip: Work in manageable sections to prevent adhesive from drying before timber panels are installed.
WHY CHOOSE
- Specifically designed for parquet and mosaic flooring
- Strong long-term bond performance
- Hard drying without cracking
- Easy water clean-up
- Trusted flooring installation performance
KEY SPECIFICATIONS
- Water-based synthetic emulsion adhesive
- Colour: Pink
- Coverage: approximately 2.8–4m² per litre
- Flash-off time: approximately 10 minutes
- Initial drying: 48 hours
- Full bond strength: 2–3 days
- Shelf life: 12 months
TRIED. TESTED. TRUSTED. SINCE 1939.
G250
