Nova 12 NovaFloor Velvet Floor Sealer | Low Sheen Wood Floor Varnish for Timber Floors
Velvet Finish Wooden Floor Sealer
KEY BENEFITS
- Velvet finish
- Hard-wearing protection
- No polishing required
- Non-slip finish
- Easy maintenance
- Preserves natural timber appearance
WHERE TO USE
- Hardwood floors
- Softwood floors
- Parquet flooring
- Strip flooring
- Mosaic flooring
- Interior timber flooring
- And many more applications
HOW TO USE
- Ensure timber moisture content is between 8% and 12%
- Sand surfaces thoroughly and remove all dust before coating
- Do not wash floors before application
- Product is supplied ready to use — do not dilute
- Apply between 10°C and 25°C
Application Tools:
• Quality brush
• Mohair roller
• Floor applicator
First Coat:
• Apply evenly
• Allow drying for 2–4 hours
• Sand using 100 grit sandpaper
Second Coat:
• Remove dust thoroughly
• Apply second coat
• Allow drying for 2–4 hours
• Sand using 220 grit sandpaper
Final Coat:
• Remove dust
• Apply final coat evenly
High Traffic Areas:
• Apply additional light coats where required
Critical: Not suitable for exterior woodwork, decking, damp timber or poorly prepared surfaces. Avoid excessive film build and apply in one direction only.
Tip: Open-grain timbers such as Pine, Oregon Pine and Yellowwood should be pre-treated with Nova Sanding Sealer for best results.
WHY CHOOSE
- Luxurious low-glare velvet finish
- Durable protection for timber floors
- Non-slip performance once cured
- No polishing required
- Suitable for residential and commercial flooring
KEY SPECIFICATIONS
- Polyurethane alkyd-based floor sealer
- Velvet finish (20–35% gloss)
- Coverage: Hardwood ±10m²/L
- Coverage: Softwood ±5m²/L
- Surface dry: 2–4 hours
- Foot traffic: 12 hours
- Full cure: 7 days
EASY TO CHOOSE. EASY TO USE. SINCE 1965.
N12CLR
