Nova 25 Tuffcoat Matt | Interior & Exterior Water-Based Timber Protection for Decking, Cladding, Fencing, Furniture & Balustrades
KEY BENEFITS
- Durable water-based timber protection coating
- Suitable for interior and exterior timber
- Water-repellent and mildew-resistant protection
- Skid-resistant finish ideal for decking and walkways
- Flexible low-build coating system
- Easy maintenance and recoating
WHERE TO USE
- Exterior timber decking
- Pergolas and timber structures
- Fences and gates
- Exterior cladding
- Outdoor furniture
- Interior furniture, cupboards, doors and joinery
- And many more applications
HOW TO USE
- Ensure timber is clean, dry and free from contamination
- Timber moisture content should not exceed 12–14%
- Sand timber as required and remove all sanding dust
- Remove oil and grease contamination using a suitable cleaner or degreaser
- Stir thoroughly before and during use
- Apply evenly using a brush, applicator or soft broom
- Work the coating thoroughly into the timber surface
- Avoid pooling or excessive film build-up
- Apply 2–3 coats depending on timber porosity and desired finish
- Allow coating to dry clear before recoating
- Allow 2–3 hours between coats under normal conditions
- Ensure adequate ventilation during application and curing
For Maintenance Recoating:
• Clean the surface thoroughly
• Remove dirt, oils and contaminants
• Allow timber to dry fully
• Reapply a maintenance coat as required
Critical: Exterior timber exposed to sunlight and weather will naturally age over time. While the pigmented finish helps slow visible UV weathering and colour fading, Nova 25 is not designed to permanently prevent natural timber ageing. Regular maintenance coats are recommended to maintain water repellency, colour consistency and long-term coating performance. Not suitable for permanently immersed or submerged marine applications.
Tip: Unlike traditional varnishes, Nova 25 generally does not require heavy sanding before maintenance recoats provided the existing coating remains sound and well adhered.
WHY CHOOSE
- Helps reduce peeling and flaking associated with traditional varnishes
- Breathable coating allows natural timber movement
- Easy long-term maintenance system
- Suitable for both horizontal and vertical timber surfaces
- Enhances natural timber grain and appearance
- Low odour, low VOC formulation
KEY SPECIFICATIONS
- Advanced water-based timber protection coating
- Matte natural-look finish
- Translucent pigmented coating
- Coverage: 7–10m²/L per coat
- Recoat time: 2–3 hours
- Surface dry: 1–2 hours
- Full cure: 3–5 days
EASY TO CHOOSE. EASY TO USE. SINCE 1965.
N25CLR | N25BLK | N25LBR | N25MBR | N25DBR | N25PIN | N25BUR
