Nova 17 Novathane PU Varnish

Nova 17 Novathane PU Varnish | Interior Polyurethane Wood Varnish for Furniture & Joinery

Interior Polyurethane Timber Varnish

KEY BENEFITS

Polyurethane protection system
Water resistant
Alcohol resistant
Heat resistant
Stain resistant
Hard-wearing finish

WHERE TO USE

Furniture
Bookcases
Cupboards
Bar tops and tables
Shelves and decorative trim
Interior timber doors and joinery
And many more applications

HOW TO USE

Ensure timber is clean, dry and free from dust, wax, grease and contamination
Sand new timber using 140–180 grit sandpaper
Remove old coatings using Nova 08 Novastrip where required
Remove wax residue using a suitable wax remover
Clean oily timbers using Mineral Turpentine and fine steel wool if necessary
Stir thoroughly before and during use

First Coat:
• May be thinned with up to 20% Mineral Turpentine to improve penetration
• Apply using a clean brush or spray equipment
• Apply evenly following the timber grain direction
• Allow 2–4 hours drying before sanding
• Sand lightly using 160–180 grit sandpaper

Second & Third Coats:
• Remove all sanding dust
• Apply subsequent coats undiluted
• Sand lightly between coats using 180–220 grit sandpaper
• Apply a third coat where required

Spray Application:
• Suitable for spray application at approximately 275kPa

Critical: Not suitable for exterior exposure, timber flooring or permanent water immersion. Do not apply to damp timber or during cold and humid conditions. Avoid excessive film build which may cause runs or wrinkling.

Tip: For enhanced timber colour, apply Nova 18 Novadye before varnishing. Do not mix Nova 18 directly into Nova 17.

WHY CHOOSE