Nova 14 Novaseal Marine Sealer | UV Resistant Exterior Timber & Deck Sealer
Marine & Exterior Timber Sealer
KEY BENEFITS
- Penetrating timber protection
- UV resistant
- Water repellent
- Anti-fungal protection
- Enhances natural timber appearance
- Will not readily crack or peel
WHERE TO USE
- Exterior doors
- Window frames
- Timber furniture
- Gates and fascias
- Timber cladding
- Garden furniture
- And many more applications
HOW TO USE
- Ensure timber is clean, dry and free from wax, grease and contamination
- Sand new timber using 140–180 grit sandpaper and remove all dust
- Stir thoroughly before and during use
- Apply using a quality bristle brush following the timber grain direction
- Work product thoroughly into end grain, joints and exposed timber edges
For Porous or Weathered Timber:
• Thin the first coat with up to 10–15% Genkem Mineral Turpentine to improve penetration
• Allow 4–8 hours drying depending on conditions
Subsequent Coats:
• Apply a minimum of 2–3 coats
• Allow at least 8–16 hours between coats
• For best results allow overnight drying between coats
• Lightly sand between coats using 220 grit sandpaper
Critical: Not suitable for continuous water immersion, high-traffic decking, below-waterline marine applications or damp timber. Do not apply during rain or in excessively humid conditions.
Tip: Pre-treat exterior timber with Nova 30 Timber Treatment & Preserver before sealing for enhanced long-term timber protection.
WHY CHOOSE
- Designed specifically for exterior timber protection
- Excellent resistance to weathering and UV exposure
- Flexible finish resists cracking and peeling
- Enhances natural timber grain and colour
- Suitable for both interior and exterior timber surfaces
KEY SPECIFICATIONS
- Resin-based timber sealer
- Available in Low Sheen and High Sheen finishes
- Coverage: 8–10m²/L per coat
- Touch dry: 2–4 hours
- Recoat time: 16 hours
- Full cure: 24–48 hours
- Shelf life: 12–24 months
EASY TO CHOOSE. EASY TO USE. SINCE 1965.
N14GLO | N14MAT
