Nova 01 Novabrik Satin Brick Dressing | Water Repellent Sealer for Facebrick & Masonry Walls
Weather Resistant Brick Dressing
KEY BENEFITS
- Weather resistant
- Water repellent
- Satin finish
- Enhances natural brick appearance
- Resists flaking, peeling and chalking
- Suitable for interior and exterior use
WHERE TO USE
- Facebrick
- Porous masonry
- Cement brick
- Terracotta
- Porous tiles
- Interior and exterior vertical walls
- And many more applications
HOW TO USE
- Ensure surfaces are clean, dry and free from dirt or loose contamination
- Remove contamination using a hard bristle brush or wire brush where required
- Allow new surfaces to cure for at least 4 weeks before application
- Confirm substrate porosity before use
Porosity Test:
• Apply droplets of water to the surface
• Immediate absorption indicates a suitable surface
• Water remaining after 2–3 minutes indicates an unsuitable surface
- Stir thoroughly before use
- Product is supplied ready to use — do not dilute
- Apply a thin even coat using a brush
- Work product thoroughly into the substrate
- Apply a second light coat after 24 hours if required
Critical: Not suitable for floors, patios, paving, horizontal surfaces, glazed brick, glazed tiles or damp surfaces. Do not apply to walls affected by reverse-side water penetration.
Tip: Always test a small area first to confirm substrate absorption and final appearance before full application.
WHY CHOOSE
- Enhances natural brick colour and appearance
- Helps protect porous masonry against weather exposure
- Penetrating low-build satin finish
- Suitable for long-term vertical surface protection
- Easy maintenance and reapplication
KEY SPECIFICATIONS
- Solvent-based synthetic resin dressing
- Satin finish
- Coverage smooth brick: 4–8m²/L
- Coverage rough brick: 3–4m²/L
- Touch dry: 3–4 hours
- Recoat time: 24 hours
- Shelf life: 12 months
EASY TO CHOOSE. EASY TO USE. SINCE 1965.
N01BRI
