Nova 7 Sanding Sealer

Nova 07 Sanding Sealer | Quick-Drying Wood Sealer for Furniture, Joinery & Timber Finishing

Quick-Drying Timber Preparation Sealer

KEY BENEFITS

Rapid quick-drying formulation
Wood sealer and grain-filling properties
Improves adhesion for topcoats
Stain-blocking properties
Creates a silky-smooth finish base
Easy sanding properties

WHERE TO USE

Wooden furniture and cabinetry
Wooden floors
Wooden doors
Wooden panelling
Wooden staircases
Skirting boards
Raw timber preparation
And many more applications

HOW TO USE

Ensure timber is clean, dry and free from dust, grease and contamination
Sand new timber smooth using 80–100 grit sandpaper and remove all dust
Remove old coatings completely using Nova 08 Novastrip where required
Ensure all previous sealers and finishes have been removed
Stir thoroughly before use
Apply a thin, even coat using a clean brush
Apply only enough material to fill the timber grain and minor surface imperfections
Allow approximately 2 hours drying before sanding
Sand smooth using 160–240 grit sandpaper

For Highly Porous Timber:
• Apply additional light coats where required
• Allow drying between coats before sanding

Topcoating:
• Overcoat with Nova solvent-based or water-based timber finishes once sanding is complete

Critical: Nova 07 is a preparation product and not a final finish. It must always be overcoated with a suitable timber sealer, oil or varnish. Not suitable for previously painted, varnished or sealed surfaces unless fully stripped back to bare timber. Do not apply to damp timber.

Tip: Nova 07 is particularly effective on softwoods such as Pine where raised grain can affect the quality of the final finish. For stained timber, apply Nova 07 directly over Nova 18 Novadye before applying the final topcoat.

WHY CHOOSE